Features
Two chips are matched for uniform
Light output, wide viewing angle
Long life-solid state reliability
I. C. Compatible/Low power consumption
Pb free

Descriptions
The LED lamps contain two integral
Chips and is available as both bicolor and bipolar types
The Bright Red and Green light is emitted by diodes
Of GaAsP/GaP and GaAsP/GaP respectively
Type of bipolar lamps are both White Diffused and
Color Diffused while the bicolor are White Diffused

Usage Notes:
The ultra bright LED is an electrostatic insensitive device, so static electricity and surge will damage the LED. It is required to wear a wrist-band when handling the LED. All device, equipment, machinery, desk and ground must be properly grounded
When using LED, it must use a protective resistor in series with DC current about 20Ma

Applications
Status indicators
Commercial use
Advertising Signs
Back lighting

Device Selection Guide

LED Part No.  Chip  Lens Color
 Material  Emitted Color  
5019R1G3C-DSC  AlGaInP  Red  Water clear
 InGaN  Green  
Absolute Maximum Rating (Ta=25C)
Parameter  Symbol  Absolute Maximum Rating  Unit
Forward Pulse Current  IFPM  70  mA
Forward Current  IFM  30  mA
Reverse Voltage  VR  5  V
Power Dissipation  PD  140  mW
Operating Temperature  Topr  -40~+80C
Storage Temperature  Tstg  -40~+100C
Soldering Heat (5s)  Tsol  260C

Electro-Optical Characteristics (Ta=25C)
Parameter  Symbol  Device  Min.  Typ.  Max.  Unit  Test Condition
Luminous Intensity Iv Red 1500 2900 mcd  IF=20mA
   Iv Green 1800 3500 IF=20mA
   
Viewing Angle 2¦È1/2 Red/green 30-40  Deg (Note 1)

Peak Emission Wavelength ¦Ëp  Red 620 630 635 nM, IF=20mA     ¦Ëp Green 520 525 530 IF=20mA
           
Spectral Line Half-Width D¦Ë Red 15 20 25 nm IF=20mA
    D¦Ë Green 30 35 40IF=20mA    
Forward Voltage VF Red 1.9 -2.3V   Green 2.9-3.5V IF=20mA    
Reverse Current IR  Red/Green 10uA VR=5V