Features
High efficiency
Low Power consumption
General purpose leads
Selected minimum intensities
Available on tape and reel
Pb free

Descriptions
The series is specially designed for applications
Requiring higher brightness
The LED lamps are available with different
Colors, intensities, epoxy colors, etc
Superior performance in outdoor environment

Usage Notes:
The ultra bright LED is an electrostatic insensitive device, so static electricity and surge will damage the LED. It is required to wear a wrist-band when handling the LED. All device, equipment, machinery, desk and ground must be properly grounded
When using LED, it must use a protective resistor in series with DC current about 20mA

Applications
Status indicators
Commercial use
Advertising Signs
Back lighting

Device Selection Guide

LED Part No.  Chip  Lens Color
 Material  Emitted Color  
5634G3C-KSB-E  InGaN  Green  Water clear

Absolute Maximum Rating (Ta=25C)
Parameter  Symbol  Absolute Maximum Rating  Unit
Forward Pulse Current  IFPM  70  mA
Forward Current  IFM  30  mA
Reverse Voltage  VR  5  V
Power Dissipation  PD  140  mW
Operating Temperature  Topr  -40~+80C
Storage Temperature  Tstg  -40~+100C
Soldering Heat (5s)  Tsol  260C

Electro-Optical Characteristics (Ta=25C)
Parameter  Symbol  Min.  Typ.  Max.  Unit  Test Condition
Luminous Intensity  Iv  1500  2000  ---  mcd  IF=20mA(Note1)
Viewing Angle  2¦È1/2  80  ---  100  Deg  (Note 2)
           
Peak Emission Wavelength  ¦Ëp  520  525  530  nm  IF=20mA
           
Spectral Line Half-Width  D¦Ë  30  35  40  nm  IF=20mA
           
Forward Voltage  VF  2.9  ---  3.5  V  IF=20mA
           
Reverse Current  IR  ---  ---  10  µ A  VR=5V
           
Note:
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.