LED-lead free

Elecsound can offer SMD LED, Outdoor Display LED and many Lighting LEDs. We can offer 3mm, 5mm, 8mm, 10mm LED. Bi-color and multi-color. Round shape and Elliptical and other shape. If you need welcome to contact with us right now. We will give you full satisfaction with our good quality, good prices and good service.

SMD LED
0603 Package Chip LED
0805 Package Chip LED
1206 Package Chip LED
Outdoor Display LED
5mm Round LED 15deg
5mm Round LED 30deg
5mm Oval LED
5mm Flat top LED
5mm Strawhat LED
Lighting LEDs
Flat top Super Flux LED
3mm Super Flux LED
5mm Super Flux LED
Tower Type LED
2x5 Rectangular Type LED
3.0 Elliptical LED
3mm Cylindrical LED
3mm Round LED
5mm Round LED
5mm Backlighting LED
5mm Bullet Type LED
5mm Strawhat Type LED
5mm Helmet Type LED
5mm Short Cylindrical LED
5mm long Cylindrical LED
5mm Elliptical LED
5mm Blinking LED
8mm Round LED
10mm Round LED
5mm Multi-Color LED
3mm Bi-Color LED
5mm Bi-Color LED
5mm Infrared LED
Photo Diode LED

Features
Package in 8mm tape on 7" diameter reel
Compatible with automatic placement equipment
Compatible with infrared and vapor phase reflow solder process
Mono-color type
RoHs Compliant

Descriptions
The 1206 SMD LED is much smaller than lead frame type components
thus enable smaller board size, higher packing density, reduced
storage space and finally smaller equipment to be obtained
Besides, lightweight makes them ideal for miniature applications.etc

Usage Notes:
Surge will damage the LED
When using LED, it must use a protective resistor in series with DC current about 20mA

Applications
Automotive: Backlighting in dashboard and switch
Telecommunication: Indicator and backlighting in telephone and fax
Flat backlight for LCD, switch and symbol
General use


Device Selection Guide

LED Part No.  Chip  Lens Color
 Material  Emitted Color  
1206G6C-KPC-S  AlGaInP  Super Yellow Green  Water clear

Absolute Maximum Rating (Ta=25C)
Parameter  Symbol  Absolute Maximum Rating  Unit
Peak Forward Current
(Duty 1/10 @1KHz)  IF  60  mA
Forward Current  IFM  25  mA
Reverse Voltage  VR  5  V
Power Dissipation  PD  120  mW
Operating Temperature  Topr  -40~+80C
Storage Temperature  Tstg  -40~+100C
Soldering Temperature Tsol Reflow Soldering : 260C for 10 sec.
Hand Soldering : 350 C for 3 sec.

Electro-Optical Characteristics (Ta=25C)
Parameter  Symbol  Min.  Typ.  Max.  Unit  Test Condition
Luminous Intensity  Iv  45  54  80  mcd  IF=20mA(Note1)
Viewing Angle  2¦È1/2  ---  130  ---  Deg  (Note 2)
Peak Emission Wavelength  ¦Ëp  ---  575  ---  nm  IF=20mA
           
Spectral Line Half-Width  D¦Ë  15  20  25  nm  IF=20mA
           
Forward Voltage  VF  1.7  2.0  2.3  V  IF=20mA
           
Reverse Current  IR  ---  ---  10  µA  VR=5V
           
Note:
1.  Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
2.  ¦È1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.